SIG Sauer P365 LCI Delete | Carbon Fiber Infused Material

The Sig Sauer P365 Loaded Chamber Indicator Delete is a precision-engineered part made from Carbon Fiber-infused material, offering enhanced durability and lightweight performance. Designed for easy push-installation, this part provides a simple solution for users looking to eliminate the loaded chamber indicator on their Sig Sauer P365, improving the firearm's aesthetics and functionality. The carbon fiber construction ensures both strength and resilience, while the user-friendly installation process makes it a convenient upgrade for any enthusiast.

• High quality CF infused material

• Easy push install

• Matte texture

• Fits P365, XMacro, XL

Installation Instructions

1. Ensure the firearm is unloaded and pointed in a safe direction.

2. Using a T-10 screwdriver, remove the two screws securing the optics plate. Lift the plate off.

3. Remove the factory-installed LCI and spring.

4. With a cotton swab, clean any grease from the LCI cavity.
Apply a small amount of oil to all surfaces where the LCI was seated.

5. Align the LCI delete plug with the cavity and gently press it into place.

6. Once the plug is slightly recessed and fully seated, reinstall the optics plate.
Secure it by torquing the T-10 screws to 9 in-lbs.

7. Perform a function check on your firearm.

Removal of the LCI Delete Plug

• Use a small flathead screwdriver to gently pry under the back edge of the plug.
• Lift upward, rocking slightly back and forth if needed.
• With a bit of patience, the plug will come out easily.

Legal Notice: This product is an LCI delete plug only and is not classified as a firearm or serialized firearm component. No firearms or ammunition are included or sold with this listing. Buyer is responsible for ensuring compliance with all local, state, and federal laws.